Holder Key for Abutment

Holder Key for Abutment

General Information

Before using DMi products, the dentist, maxillofacial surgeon, or dental technician should carefully read all indications, contraindications, recommendations, warnings, and instructions, as well as all additional product documentation including surgical and prosthetic manuals, catalogs, and technical specifications.

DMi recommends professional training in implantology and prosthetic rehabilitation before clinical use.

Detailed product information is available through authorized DMi representatives and on the company website:
www.dmimplant.online

Product Description

The Holder Key for Abutment is a precision surgical and prosthetic instrument designed for secure handling, positioning, placement, and removal of implant abutments during implantology and restorative dental procedures.

The instrument allows accurate manipulation of compatible implant abutments while improving procedural safety and clinical convenience during surgical and prosthetic workflows.

Manufactured from high-quality medical-grade stainless steel, the Holder Key provides excellent mechanical strength, corrosion resistance, dimensional precision, and long-term clinical durability.

The ergonomic design supports stable handling and controlled positioning of prosthetic components, particularly in areas with limited intraoral access.

Intended Use

The Holder Key for Abutment is intended for:

- Implant abutment placement
- Abutment removal
- Prosthetic component handling
- Implant restorative procedures
- Surgical implant procedures
- Dental laboratory procedures

Indications

The instrument is indicated for:

- Placement of implant abutments
- Stabilization of prosthetic components
- Abutment fixation procedures
- Implant restorative workflows
- Screw-retained restorations
- Dental implant prosthetic procedures

Contraindications

Do not use in cases of:

- Damaged or worn instrument tips
- Use with incompatible implant systems
- Improper sterilization
- Improper prosthetic component compatibility

Warnings

- The product is supplied non-sterile.
- Sterilization before use is mandatory.
- Only qualified dental professionals should use the instrument.
- Excessive force may damage the abutment or implant components.
- Inspect the instrument before each use for wear, deformation, or damage.
- Use only compatible implant prosthetic components.

Clinical Procedure

1. Preparation
   - Sterilize the Holder Key before clinical use.
   - Verify compatibility between the implant system and prosthetic abutment.
2. Abutment Engagement
   - Securely engage the Holder Key with the compatible implant abutment.
   - Ensure stable and accurate connection before placement
3. Abutment Placement
   - Carefully position the abutment onto the implant platform.
   - Ensure complete and passive seating of the abutment.
4. Stabilization
   - Hold the abutment in the correct position during fixation procedures.
   - Tighten the prosthetic screw using the appropriate driver according to the recommended torque protocol.
5. Final Verification
    Verify:
   - Proper abutment seating
   - Component stability
   - Passive prosthetic fit
   - Correct positioning
6. Removal Procedure
   - When necessary, use the Holder Key to safely stabilize and remove the abutment according to the restorative protocol.

Sterilization

Before use, sterilize the instrument in an autoclave at: 135°C (275°F)

Storage

Store in a clean, dry environment away from contamination, moisture, and direct sunlight.

CadCam