All about product
Reviews0
Questions0
INSTRUCTION FOR USE
CAD/CAM Libraries
Recommended
In Stock
Product Code: 901332
Brand: DMi
Reviews:
0
Found cheaper?
$49.00
Ex Tax:
$49.00
Buy in 1 click:
Product Description
Open Lock Transfer for Conical Implant CH2.43
The Open Lock Transfer for Conical Implant CH2.43 is designed for accurate open-tray impressions of osseointegrated dental implants with a CH2.43 conical internal connection. The transfer consists of two components: a cylindrical transfer sleeve and a fastening screw, ensuring stable fixation and precise transfer of implant position during impression procedures.
The supragingival transfer sleeve features a precision-machined cone + hex 2.43 mm connection that securely engages the implant connection with a locking effect. The transfer is directly fixed to the implant using a fastening screw (712012), providing reliable positioning and impression accuracy.
The transfer is installed and removed using a 1.27 mm hex driver (431412 or equivalent).
Manufactured from high-quality stainless steel, the transfer provides excellent dimensional stability, corrosion resistance, durability, and mechanical strength for clinical use.
Specifications
- Connection: Conical Hex CH2.43
- Diameter: 4.5 mm
- Height: 16 mm
- Material: Stainless steel
- Components: Transfer sleeve and fastening screw
Indications for Use
Intended for open-tray impression techniques with osseointegrated implants in all areas of the upper and lower jaw.
Compatible with:
- UMI implants: 4.2 mm, 5.0 mm, 6.0 mm
- PMI implants: 5.0 mm, 6.0 mm
Sterilization
- The transfer is intended for single-patient use only.
- The product is supplied non-sterile and should be sterilized in an autoclave at 135°C (275°F) before use.
Advantages
- Secure screw-retained fixation for accurate positioning
- Precision transfer of implant orientation and position
- Compatible with CH2.43 conical implant connection
- Reliable seating within the implant connection
- Durable stainless steel construction
- Designed for predictable restorative workflows
- Supports highly accurate open-tray impression procedures
- Compatible with multiple implant systems
- Easy handling using standard 1.27 mm hex driver
The Open Lock Transfer for Conical Implant CH2.43 is designed for accurate open-tray impressions of osseointegrated dental implants with a CH2.43 conical internal connection. The transfer consists of two components: a cylindrical transfer sleeve and a fastening screw, ensuring stable fixation and precise transfer of implant position during impression procedures.
The supragingival transfer sleeve features a precision-machined cone + hex 2.43 mm connection that securely engages the implant connection with a locking effect. The transfer is directly fixed to the implant using a fastening screw (712012), providing reliable positioning and impression accuracy.
The transfer is installed and removed using a 1.27 mm hex driver (431412 or equivalent).
Manufactured from high-quality stainless steel, the transfer provides excellent dimensional stability, corrosion resistance, durability, and mechanical strength for clinical use.
Specifications
- Connection: Conical Hex CH2.43
- Diameter: 4.5 mm
- Height: 16 mm
- Material: Stainless steel
- Components: Transfer sleeve and fastening screw
Indications for Use
Intended for open-tray impression techniques with osseointegrated implants in all areas of the upper and lower jaw.
Compatible with:
- UMI implants: 4.2 mm, 5.0 mm, 6.0 mm
- PMI implants: 5.0 mm, 6.0 mm
Sterilization
- The transfer is intended for single-patient use only.
- The product is supplied non-sterile and should be sterilized in an autoclave at 135°C (275°F) before use.
Advantages
- Secure screw-retained fixation for accurate positioning
- Precision transfer of implant orientation and position
- Compatible with CH2.43 conical implant connection
- Reliable seating within the implant connection
- Durable stainless steel construction
- Designed for predictable restorative workflows
- Supports highly accurate open-tray impression procedures
- Compatible with multiple implant systems
- Easy handling using standard 1.27 mm hex driver
Reviews
There are no reviews for this product, be the first to leave your review.
Answers & questions
No questions about this product, be the first and ask your question.
Open Lock Transfer for Conical Implant CH2.43
General Information
Before using DMi products, the dentist, maxillofacial surgeon, or dental technician should carefully read the indications, contraindications, recommendations, warnings, and instructions, as well as all additional product information, including product descriptions, surgical and prosthetic manuals, catalogs, and related documentation.
DMi also recommends participation in relevant continuing education courses conducted on-site or remotely by authorized DMi specialists.
Detailed documentation and training information are available through authorized DMi representatives and on the company website:
www.dmimplant.online
Product Description
The Open Lock Transfer for Conical Implant CH2.43 (901332) is intended for open tray impression procedures and consists of two components:
- Cylindrical transfer sleeve
- Fastening screw (712012)
- Technical Specifications
- Diameter: 4.5 mm
- Height: 16 mm
- Material: Stainless steel
- Implant connection: Conical Hex CH2.43
The transfer sleeve is a supragingival component featuring a precision-machined cone + hexagon 2.43 mm connection. The sleeve engages the implant connection with a secure locking effect and is fixed directly to the implant using the fastening screw.
The transfer is installed and removed using a 1.27 mm hex driver (431412 or equivalent).
The product is intended for taking impressions of osseointegrated implants with CH2.43 conical internal connection, including:
- UMI implants: 4.2 mm, 5.0 mm, 6.0 mm
- PMI implants: 5.0 mm, 6.0 mm
Warnings
- The product is intended for single-patient use only.
- The product is supplied non-sterile.
- Sterilization in an autoclave at 135°C (275°F) before clinical use is recommended.
- The dentist, maxillofacial surgeon, or dental technician must be familiar with the clinical protocol for using implant impression transfers.
- Improper handling or incorrect clinical use may affect impression accuracy and prosthetic outcomes.
Indications
The impression transfer is intended for use in implant prosthetics to accurately transfer the position of an osseointegrated implant from the oral cavity to a laboratory model using the open tray impression technique.
Contraindications
- Lack of implant osseointegration
- Allergy or hypersensitivity to metals
- Trismus of masticatory muscles
- Limited mouth opening
- Increased gag reflex
Procedure for Use
An open-tray impression using an implant transfer allows highly accurate transfer of the implant position from the oral cavity to the working model compared to a closed-tray impression.
Clinical Procedure
1. Remove the gingiva former using a 1.27 mm hex driver.
2. Insert the Open Lock Transfer CH2.43 (901332) into the implant cone + hexagon connection.
3. Insert the fastening screw (712012) through the hollow opening of the transfer and secure the transfer to the implant using a 1.27 mm hex driver.
4. Cover the occlusal opening of the fastening screw with wax to prevent impression material from entering the screw channel.
5. Prepare the impression tray with an occlusal opening corresponding to the position of the transfer screw.
6. Take the impression using the “sandwich” technique:
- Low-viscosity material around the transfer
- High-viscosity material in the tray
- Medium-viscosity material may also be used when clinically appropriate.
7. Remove excess impression material from the occlusal access opening to expose the fastening screw.
8. After complete polymerization of the impression material, unscrew the fastening screw (712012) from the implant using a 1.27 mm hex driver.
9. Remove the impression together with the transfer from the oral cavity
10. Attach the corresponding laboratory analogue for Conical Implant CH2.43 (920030 or equivalent) to the transfer within the impression using the fastening screw (712012).
11. Transfer the impression to the dental laboratory.
12. The dental technician fabricates gingival imitation material around the implant analogue area and pours the impression using dental stone.
13. After complete hardening of the model, the fastening screw is unscrewed and the impression with transfer is separated from the laboratory analogue.
14. The implant analogue remains embedded within the cast, accurately reproducing the intraoral implant position.
15. The resulting master model is used for fabrication of the implant-supported prosthetic restoration.
Sterilization
- The product is supplied non-sterile and must be sterilized before use in an autoclave at: 135°C (275°F)
- Single-patient use only.
Storage
Store in a clean, dry environment at room temperature away from direct sunlight and contamination.
Disclaimer
DMi Technology LLC. is not responsible for complications, injuries, or other negative consequences resulting from:
- Incorrect clinical indications
- Improper prosthetic technique
- Incorrect component selection
- Improper use or handling of instruments and components
- Failure to follow the instructions for use
The treating dentist, maxillofacial surgeon, and dental technician are solely responsible for appropriate clinical and laboratory application of the product.
DMi recommends appropriate professional training and participation in specialized DMi educational programs prior to use.
General Information
Before using DMi products, the dentist, maxillofacial surgeon, or dental technician should carefully read the indications, contraindications, recommendations, warnings, and instructions, as well as all additional product information, including product descriptions, surgical and prosthetic manuals, catalogs, and related documentation.
DMi also recommends participation in relevant continuing education courses conducted on-site or remotely by authorized DMi specialists.
Detailed documentation and training information are available through authorized DMi representatives and on the company website:
www.dmimplant.online
Product Description
The Open Lock Transfer for Conical Implant CH2.43 (901332) is intended for open tray impression procedures and consists of two components:
- Cylindrical transfer sleeve
- Fastening screw (712012)
- Technical Specifications
- Diameter: 4.5 mm
- Height: 16 mm
- Material: Stainless steel
- Implant connection: Conical Hex CH2.43
The transfer sleeve is a supragingival component featuring a precision-machined cone + hexagon 2.43 mm connection. The sleeve engages the implant connection with a secure locking effect and is fixed directly to the implant using the fastening screw.
The transfer is installed and removed using a 1.27 mm hex driver (431412 or equivalent).
The product is intended for taking impressions of osseointegrated implants with CH2.43 conical internal connection, including:
- UMI implants: 4.2 mm, 5.0 mm, 6.0 mm
- PMI implants: 5.0 mm, 6.0 mm
Warnings
- The product is intended for single-patient use only.
- The product is supplied non-sterile.
- Sterilization in an autoclave at 135°C (275°F) before clinical use is recommended.
- The dentist, maxillofacial surgeon, or dental technician must be familiar with the clinical protocol for using implant impression transfers.
- Improper handling or incorrect clinical use may affect impression accuracy and prosthetic outcomes.
Indications
The impression transfer is intended for use in implant prosthetics to accurately transfer the position of an osseointegrated implant from the oral cavity to a laboratory model using the open tray impression technique.
Contraindications
- Lack of implant osseointegration
- Allergy or hypersensitivity to metals
- Trismus of masticatory muscles
- Limited mouth opening
- Increased gag reflex
Procedure for Use
An open-tray impression using an implant transfer allows highly accurate transfer of the implant position from the oral cavity to the working model compared to a closed-tray impression.
Clinical Procedure
1. Remove the gingiva former using a 1.27 mm hex driver.
2. Insert the Open Lock Transfer CH2.43 (901332) into the implant cone + hexagon connection.
3. Insert the fastening screw (712012) through the hollow opening of the transfer and secure the transfer to the implant using a 1.27 mm hex driver.
4. Cover the occlusal opening of the fastening screw with wax to prevent impression material from entering the screw channel.
5. Prepare the impression tray with an occlusal opening corresponding to the position of the transfer screw.
6. Take the impression using the “sandwich” technique:
- Low-viscosity material around the transfer
- High-viscosity material in the tray
- Medium-viscosity material may also be used when clinically appropriate.
7. Remove excess impression material from the occlusal access opening to expose the fastening screw.
8. After complete polymerization of the impression material, unscrew the fastening screw (712012) from the implant using a 1.27 mm hex driver.
9. Remove the impression together with the transfer from the oral cavity
10. Attach the corresponding laboratory analogue for Conical Implant CH2.43 (920030 or equivalent) to the transfer within the impression using the fastening screw (712012).
11. Transfer the impression to the dental laboratory.
12. The dental technician fabricates gingival imitation material around the implant analogue area and pours the impression using dental stone.
13. After complete hardening of the model, the fastening screw is unscrewed and the impression with transfer is separated from the laboratory analogue.
14. The implant analogue remains embedded within the cast, accurately reproducing the intraoral implant position.
15. The resulting master model is used for fabrication of the implant-supported prosthetic restoration.
Sterilization
- The product is supplied non-sterile and must be sterilized before use in an autoclave at: 135°C (275°F)
- Single-patient use only.
Storage
Store in a clean, dry environment at room temperature away from direct sunlight and contamination.
Disclaimer
DMi Technology LLC. is not responsible for complications, injuries, or other negative consequences resulting from:
- Incorrect clinical indications
- Improper prosthetic technique
- Incorrect component selection
- Improper use or handling of instruments and components
- Failure to follow the instructions for use
The treating dentist, maxillofacial surgeon, and dental technician are solely responsible for appropriate clinical and laboratory application of the product.
DMi recommends appropriate professional training and participation in specialized DMi educational programs prior to use.
CadCam
Open Lock Transfer for Conical Implant CH2.43
$49.00
