Product Description
Closed clip transfer H2.43 for closed tray is directly fixed in the internal connection of the implant without a screw due to retention, using a clip on the transfer.
- Diameter: 4.5 mm
- Height: 13mm.
Made of stainless steel.
Used for impressions with the osseointegrated implant H2.43 in all parts of the upper and lower jaw.
Used for taking closed tray impressions of osseointegrated implants:
- UNIQUE 3.75 mm, 4.2 mm, 5.0 mm; 6.0 mm,
- PERFECT 4.2 mm, 5.0 mm; 6.0 mm,
- PRIMA 3.3 mm; 3.75mmd; 4.2mmd; 5.0mmd; 6.0mmd, and from any other osseointegrated implants that have an H2.43 internal connection.
Single use recommended sterilization in autoclave at 135°C to 274°F before use.
Reviews
There are no reviews for this product, be the first to leave your review.
Answers & questions
No questions about this product, be the first and ask your question.
Before using
DMi products, the dentist/maxillofacial surgeon/dental technician should
carefully read the indications, contraindications, recommendations, warnings
and instructions, as well as all other product information (product
description, surgical and reconstructive equipment description, catalog, etc.).
DMi also recommends attending our relevant continuing education courses, which
are conducted on-site and remotely by authorized DMi specialists. The above
documents and detailed information on the training courses are available from
the relevant representatives in different countries and on the company website:
www.dmimplant.online
Product Description:
The closed
clip transfer H2.43 for a closed tray is fixed directly in the internal
connection of the implant without a screw due to retention, using a clip on the
transfer. - The transfer consists of one part - a cylindrical body of the
transfer, a 2.43 mm hexagon and a clip. The diameter is 4.5 mm, the height is 13 mm. Made of
stainless steel. The transfer hexagon enters the implant like a lock. The clip
fixes the transfer to the implant due to retention. It is used to take
impressions with a closed tray from osseointegrated implants: UNIQUE 3.75 mm,
4.2 mm, 5.0 mm; 6.0 mm, PERFECT 4.2 mm, 5.0 mm; 6.0 mm, PRIMA 3.3 mm; 3.75 mmd;
4.2 mmd; 5.0 mm; 6.0 mm or any other osseointegrated implants with an internal
connection H2.43.
Warnings:
The transfer
is intended for single use. The medical product in the package is not sterile. Autoclave
sterilization at 135 °C to 274 °F is recommended before use. The
dentist/maxillofacial surgeon should be properly familiar with the technology
of using the transfer.
Indications:
The
impression transfer is a device used by implantologists to accurately transfer
the position of an osseointegrated implant from the oral cavity to a plaster
model using the closed tray impression method.
Contraindications:
1. Lack of
osseointegration of the dental implant;
2. Allergy
to metals;
3. Trismus
of the masticatory muscles,
4. Poor
mouth opening
5. Increased gag reflex
Procedure for use:
A closed
impression allows for a more accurate "transfer" of the implantation
site from the oral cavity to the model. This method consists of several stages:
- the gum
former is unscrewed using a 1.27 mm Allen key;
- the
transfer (901546) is installed in the internal hexagon of the implant, with a
vertical movement into the implant;
- the clip
fixes the transfer in the internal thread of the implant using retention;
- the
impression is obtained using the "sandwich" method (two-layer
impression). Both layers of the impression material (internal with low
viscosity and external with high viscosity) are introduced into the oral cavity
simultaneously. It is also possible to use one of the materials of medium
viscosity;
- after the
impression mass has hardened, the impression is removed from the oral cavity
together with the transfer;
- a
laboratory analogue for an internal Hex 2.43 implant is attached to the
transfer, which is in the thickness of the impression - a part simulating the
intraosseous part of the implant (920038, etc.) and the result is a structure
"impression + transfer + analogue".
-
"impression + transfer + analogue" is transferred to the dental
technician;
- the dental
technician creates an imitation of the gum with elastic plastic in the area of
the implants, casts the impression with super plaster, then separates the
"impression + transfer" from the plaster model;
- as a
result, an analogue representing the implant appears inside the model, and
around it is an imitation of the gum,
- the
resulting model is used in the dental laboratory to manufacture a prosthesis on
an osseointegrated implant.
Disclaimer:
DMi, the
importer and supplier of DMi products, is not responsible for complications,
other negative consequences or damage that may arise due to reasons such as
incorrect indications or prosthetic technique, incorrect selection of the
transfer or analogue, improper use or handling of instruments, etc. The
dentist/maxillofacial surgeon is responsible for any such complications or
other consequences. The dentist/maxillofacial surgeon must be properly trained
in the use of the technology in specialized DMi courses.
