Titanium Esthetic Screw Multi-Unit for Conical Implant CH2.1

Titanium Esthetic Screw Multi-Unit for Conical Implant CH2.1

Intended Use

The Titanium Esthetic Screw Multi-Unit is intended for:

- Screw-retained implant-supported restorations
- Multi-unit prosthetic rehabilitation
- Implant-supported permanent restorations
- Prosthetic fixation on osseointegrated implants

Indications

The product is indicated for use with:

- CH2.1 conical implant systems
- UMI implant systems
- PMI implant systems
- Screw-retained prosthetic restorations
- Titanium prosthetic screw M1.6 (701200)

Contraindications

Do not use the product in:

- Patients with known hypersensitivity to titanium alloys
- Clinical situations incompatible with implant-supported restorations
- Cases where the component is damaged, deformed, or worn

Warnings

- Product is supplied non-sterile.
- Sterilization before clinical use is mandatory.
- Use only compatible implant systems, prosthetic components, and fixation screws.
- Improper seating may result in prosthetic misfit or mechanical complications.
- Do not use excessive tightening force.
- Intended for professional dental use only.

Precautions

- Verify compatibility with the implant system before use.
- Inspect the component before clinical application.
- Ensure complete seating of the abutment into the implant connection.
- Use only compatible titanium prosthetic screw M1.6 (701200).
- Use only a 1.25 mm hex driver.
- Follow standard implant prosthetic and infection control procedures.

Instructions for Clinical Use

1. Preparation
  - Verify implant compatibility and prosthetic treatment plan.
  - Clean and dry the implant connection area before placement.
2. Placement of the Multi-Unit Abutment
  - Position the Titanium Esthetic Screw Multi-Unit into the CH2.1 implant internal connection.
  - Secure the abutment by screwing into the internal implant thread.
  - Tighten using a 1.25 mm hex driver according to standard prosthetic protocols.
3. Prosthetic Procedure
  - Attach the permanent prosthetic restoration.
  - Secure the restoration using titanium prosthetic screw M1.6 (701200).
  - Verify passive fit and prosthetic alignment before final fixation.
4. Final Restoration
  - Complete the screw-retained restorative procedure according to standard clinical protocols.
  - Verify occlusion, prosthetic stability, and final seating.

Cleaning and Sterilization

- Sterilization Parameters
- Autoclave sterilization
- Temperature: 135°C / 274°F

Storage

- Store in a clean, dry environment.
- Protect from contamination, moisture, and mechanical damage.
- Avoid exposure to corrosive substances.

CadCam