Knife Hand for Open Cover Screw

Knife Hand for Open Cover Screw use:Modified two-stage implantation:

Installation of an open cover screw (720838, etc.). The screw is made of medical titanium alloy Ti6Al4V ASTM-136. The outer surface is smooth. Used for one-time closure of the internal connection of the implant in a modified two-stage implantation. The bottom of the screw has a 1-72 UNF thread that secures the screw to the implant. Sterilization in an autoclave at 135°C/274°F is required before use. There is a 1.25mm hex pin at the top of the screw. The top of the pin is sharp. The length of the pin is from 2mm to 6mm. Used with a 1.25 hollow hex key (431238.) Screw into the titanium implant and lightly tighten it.

Next, we perform hermetic suturing of the gums over the implant and screw. At the second atraumatic surgical stage, there is no need to make an incision in the gum above the implant, lift the gum and suture the wound. Using palpation, we find the screw pin and then, using a gum punch (471230) and a 1.25 hollow hex key (431238.), we remove the gum above the implant together with an open cover screw. Implant prosthetics can begin on the day the implant is opened.

Knife Hand for Open Cover Screw

$55.00

Add to Cart