Motor Hex2.43 Implant drive key for contra angular

The length of the working bottom part of the key is 12 mm. On the bottom of the key there is a 2.43 mm hexagon, which is inserted into the internal hexagon of the implant H2.43 or CH2.43 (or inserted into the implant carrier from the end side - for screwing into the implant bone together with the implant carrier).

On the top of the key there is a device for attaching the key to the contra-angle tip of the physio dispenser. The key is made of medical stainless steel 420 series. The outer surface of the key is smooth.

Used for machine installation or removal of an implant with an H2.43 hex socket or an implant with a CH2.43 conical connection.

The keys have high edges that help visually determine the position of the implant Hex. It is recommended to install the flat part of the facet on the labial side - this allows the use of standard

abutments.

Also, on the keys there are two round marks showing the depth of immersion of the upper part of the implant in relation to the bone and the mark of gum penetration - 3 mm, the second -

5 mm.

Before use, sterilization in an autoclave at 135°C/274°F is required.