Product Description
The length of the working lower part of the key is 18 mm. On the lower part of the key there is a 2.1 mm hexagon, which is inserted into the internal hexagon of the H2.1 or CH2.1 implant.
The top of the wrench has a 6.35mm hex that can be used in conjunction with a hand drive wrench, ratchet wrench (446301, etc) or a hollow wrench (446303, etc).
The key is made of 420 series medical steel. The outer surface of the key is smooth.
Used for manual installation or removal into bone of a narrow implant with an internal hexagon H2.1 and an implant with a conical connection CH2.1 (or inserted into the implant carrier from the end side - for screwing into the implant bone together with the implant carrier).
The keys have high edges that help visually guide the position of the implant hexagon.
It is recommended to install the flat part of the facet on the vestibular side - this allows the use of standard abutments.
Also, the keys have two circular marks showing the depth of immersion of the upper part of the implant in relation to the bone and the gum-singing mark is 3 mm, the second is 5 mm.
Before use, sterilization in an autoclave at a temperature of 135°C/274°F is necessary.
Reviews
There are no reviews for this product, be the first to leave your review.
Answers & questions
No questions about this product, be the first and ask your question.