Closed Clip Transfer Slim for Implant Hex 2.43

Before using DMi products, the dentist/maxillofacial surgeon/dental technician should carefully read the indications, contraindications, recommendations, warnings and instructions, as well as all other product information (product description, surgical and reconstructive equipment description, catalog, etc.). DMi also recommends attending our relevant continuing education courses, which are conducted on-site and remotely by authorized DMi specialists. The above documents and detailed information on the training courses are available from the relevant representatives in different countries and on the company website: www.dmimplant.online

Product Description:

The closed clip transfer slim H2.43 for a closed tray is fixed directly in the internal connection of the implant without a screw due to retention, using a clip on the transfer. - The transfer consists of one part - a cylindrical body of the transfer, a 2.43 mm hexagon and a clip. Diameter 3.8 mm, height 13 mm. Made of stainless steel. The transfer hexagon enters the implant like a lock. The clip fixes the transfer to the implant due to retention. It is used to take impressions with a closed tray from osseointegrated implants: UNIQUE 3.75 mm, 4.2 mm, 5.0 mm; 6.0 mm, PERFECT 4.2 mm, 5.0 mm; 6.0 mm, PRIMA 3.3 mm; 3.75 mmd; 4.2 mmd; 5.0 mm; 6.0 mm or any other osseointegrated implants with an internal connection H2.43.

Warnings:

The transfer is intended for single use. The medical product in the package is not sterile. Autoclave sterilization at 135 °C to 274 °F is recommended before use. The dentist/maxillofacial surgeon should be properly familiar with the technology of using the transfer.

Indications:

The impression transfer is a device used by implantologists to accurately transfer the position of an osseointegrated implant from the oral cavity to a plaster model using the closed tray impression method.

Contraindications

1. Lack of osseointegration of the dental implant;

2. Allergy to metals;

3. Trismus of the masticatory muscles,

4. Poor mouth opening

5. Increased gag reflex

Procedure for use:

A closed impression allows for a more accurate "transfer" of the implantation site from the oral cavity to the model. This method consists of several stages:

- the gum former is unscrewed using a 1.27 mm Allen key;

- the transfer (901540) is installed in the internal hexagon of the implant, with a vertical movement into the implant;

- the clip fixes the transfer in the internal thread of the implant using retention;

- the impression is obtained using the "sandwich" method (two-layer impression). Both layers of the impression material (internal with low viscosity and external with high viscosity) are introduced into the oral cavity simultaneously. It is also possible to use one of the materials of medium viscosity;

- after the impression mass has hardened, the impression is removed from the oral cavity together with the transfer;

- a laboratory analogue for an internal Hex 2.43 implant is attached to the transfer, which is in the thickness of the impression - a part simulating the intraosseous part of the implant (920038, etc.) and the result is a structure "impression + transfer + analogue".

- "impression + transfer + analogue" is transferred to the dental technician;

- the dental technician creates an imitation of the gum with elastic plastic in the area of ​​the implants, casts the impression with super plaster, then separates the "impression + transfer" from the plaster model;

- as a result, an analogue representing the implant appears inside the model, and around it is an imitation of the gum,

- the resulting model is used in the dental laboratory to manufacture a prosthesis on an osseointegrated implant.

Disclaimer:

DMi, the importer and supplier of DMi products, is not responsible for complications, other negative consequences or damage that may arise due to reasons such as incorrect indications or prosthetic technique, incorrect selection of the transfer or analogue, improper use or handling of instruments, etc. The dentist/maxillofacial surgeon is responsible for any such complications or other consequences. The dentist/maxillofacial surgeon must be properly trained in the use of the technology in specialized DMi courses.