All about product
Reviews
INSTRUCTION FOR USE
Product Description
Angular Titanium Abutment H2.43 for Turning 25°
The Angular Titanium Abutment H2.43 for Turning 25° is designed for the fabrication of custom cement-retained implant restorations. Featuring a 25° angled body relative to the implant axis, it enables correction of implant angulation and facilitates optimal prosthetic positioning in challenging clinical situations.
Manufactured from high-strength medical-grade titanium alloy (Ti6Al4V) in accordance with ASTM F136 standards, the abutment provides excellent bio-compatibility, durability, and precision for custom prosthetic fabrication. It is intended for use with implants featuring an internal hex connection of 2.43 mm and an internal thread of 1-72 UNF. The abutment connects directly to the implant using fixation screw 701203.
This component is supplied as a prefabricated titanium base for dental laboratory use and is designed to be customized by milling and turning to create a patient-specific implant abutment.
Compatible Implant Systems
- UNIQUE Implants: Ø3.75 mm, Ø4.2 mm, Ø5.0 mm, Ø6.0 mm
- PERFECT Implants: Ø4.2 mm, Ø5.0 mm, Ø6.0 mm
- PRIMA Implants: Ø3.3 mm, Ø3.75 mm, Ø4.2 mm, Ø5.0 mm, Ø6.0 mm
Key Features
- Designed for cement-retained restorations
- 25° angled abutment body
- Internal hex connection: H2.43 mm
- Internal thread: 1-72 UNF
- Manufactured from Ti6Al4V ASTM F136 medical-grade titanium
- Suitable for custom milling and turning procedures
- Direct implant connection with screw 701203
- Intended for dental laboratory applications
Sterilization
Prior to clinical use, the abutment must be sterilized in an autoclave at 135°C (275°F) according to standard sterilization protocols.
Reviews
There are no reviews for this product, be the first to leave your review.
Angular Titanium Abutment H2.43 for Turning 25°
Intended Use
The Angular Titanium Abutment H2.43 for Turning 25° is intended for the fabrication of custom implant-supported cement-retained restorations. The component is customized by milling and turning procedures performed in a dental laboratory.
Contraindications
Do not use:
- In patients with known allergy or hypersensitivity to titanium alloys.
- With implant systems not listed in these instructions.
- If the component is damaged or shows signs of deformation or contamination.
Warnings
- This product is intended for use only by qualified dental professionals and dental laboratories.
- Use only original compatible components.
- Improper use may result in prosthetic complications, loosening of components, or restoration failure.
- Do not modify the implant connection interface.
Precautions
- Verify compatibility before use.
- Inspect the component prior to use.
- Avoid excessive material removal during milling and customization procedures.
- Follow accepted prosthetic and laboratory protocols.
- Maintain traceability of the product lot number in patient records.
Instructions for Use
Laboratory Procedure
- Verify compatibility of the abutment with the selected implant system.
- Inspect the abutment for damage or defects.
- Customize the abutment by milling and turning according to the planned restoration design.
- Finish and polish the customized abutment following standard laboratory procedures.
- Clean the component thoroughly before sterilization.
Clinical Procedure
- Sterilize the abutment before clinical use.
- Connect the abutment to the implant using fixation screw 701203.
- Verify proper seating and fit of the abutment.
- Fabricate or seat the cement-retained restoration.
- Remove excess cement according to accepted clinical protocols.
- Verify occlusion, stability, and soft tissue adaptation.
Sterilization
- The product is supplied non-sterile.
- Before clinical use, sterilize the abutment in a steam autoclave using a validated sterilization cycle.
- Recommended sterilization temperature: 135°C (275°F)
- Follow the autoclave manufacturer's instructions regarding exposure and drying times.
Storage
Store in a clean, dry environment in the original packaging. Protect from contamination, moisture, and mechanical damage.
-228x228.jpg "Titanium Abutment Wide H2.43 for Turning")
-228x228.jpg "Titanium Abutment Super Wide H2.43 for Turning")
