Product Description
Cylindrical drill with a diameter of 2mm to 5.3mm with internal cooling.
Along the entire length of the drill, there is an internal hole with a diameter of 0.3mm, for cooling the drill with water during use. The length of the working part of the drill is 11mm.
On the working part there are circular markers (5mm / 6mm / 7mm / 8mm / 10mm) to control the drilling depth.
On the non-working part of the drill there is a circular color marking that indicates the diameter of the drill (white-2mm; yellow-2.5mm; red-2.8mm; blue-3.2mm; green- 3.7mm; black-4.2mm; brown-5.3mm).
Made of stainless steel.
Used for bone drilling and implant site preparation. Used in conjunction with a low-speed contra-angle (max. 2000 rpm).
Before use, before sterilization and after use, be sure to clean the internal hole of the drill from blood, hard and soft particles. Sterilization in an autoclave at 135°C / 274°F is mandatory before use.
Reviews
There are no reviews for this product, be the first to leave your review.
Answers & questions
No questions about this product, be the first and ask your question.