All about product
Reviews
Questions
INSTRUCTION FOR USE
CAD/CAM Libraries
Product Description
Intended Use
The Titanium Abutment with Ball Attachment for Conical Implant CH 2.43 is intended for use in dental prosthetics to:
- Provide retention for removable restorations on osseointegrated implants
- Support overdenture solutions using ball attachment systems
- Ensure stable and reliable fixation of prosthetic structures
Indications
- Use with conical implants featuring internal cone + Hex 2.43 mm connection
- Removable implant-supported restorations (overdentures)
- Standard (0°) implant alignment cases
Contraindications
- Do not use in patients with known hypersensitivity to titanium
- Not intended for fixed prosthetic restorations
- Do not use if the component is damaged or deformed
Preparation Before Use
- Supplied non-sterile
- Must be sterilized before use in an autoclave at: 135°C (274°F)
- Inspect the abutment for damage, deformation, or contamination prior to use
Clinical Procedure
- Ensure the implant is properly placed and osseointegrated
- Clean and dry the internal implant connection
- Insert the ball abutment into the implant
- Tighten using a 1.25 mm hex key
- Verify correct seating and alignment of the abutment
- Place the metal cap (670240) and nylon cap (670238, etc.) into the prosthesis
- Seat the prosthesis onto the ball attachment
- Verify retention, stability, and proper fit
Post-Placement Care
- Instruct the patient on proper hygiene and maintenance
- Regularly check retention elements and replace worn nylon caps
- Monitor implant and prosthetic condition during follow-up visits
Warnings & Precautions
- For professional dental use only
- Use only with compatible CH 2.43 implant systems
- Ensure proper tightening to avoid loosening or damage
- Do not apply excessive force during placement
- Follow standard implantology and prosthetic protocols
Storage
- Store in a clean, dry environment
- Avoid contamination prior to sterilization
Reviews
There are no reviews for this product, be the first to leave your review.
Answers & questions
No questions about this product, be the first and ask your question.
Titanium Abutment with Ball Attachment for Implants H2.1 – H2.43
Intended Use
The Titanium Abutment with Ball Attachment for Implants H2.1 – H2.43 is intended for use in dental prosthetics to:
- Provide retention for removable restorations on osseointegrated implants
- Support overdenture solutions using ball attachment systems
- Ensure stable and reliable fixation of prosthetic structures
Indications
- Use with implants featuring internal Hex connections H2.1 and H2.43
- Removable implant-supported restorations (overdentures)
- Standard (0°) implant alignment cases
Contraindications
- Do not use in patients with known hypersensitivity to titanium
- Not intended for fixed prosthetic restorations
- Do not use if the component is damaged or deformed
Preparation Before Use
- Supplied non-sterile
- Must be sterilized before use in an autoclave at: 135°C (274°F)
- Inspect the abutment for damage, deformation, or contamination prior to use
Clinical Procedure
- Ensure the implant is properly placed and osseointegrated
- Clean and dry the internal implant connection
- Insert the abutment into the implant (H2.1 or H2.43 connection)
- Tighten using a 1.25 mm hex key
- Verify correct seating and alignment of the abutment
- Place the metal cap (670240) and nylon cap (670238, etc.) into the prosthesis
- Seat the prosthesis onto the ball attachment
- Verify retention, stability, and proper fit
Post-Placement Care
- Instruct the patient on proper hygiene and maintenance
- Regularly check retention elements and replace worn nylon caps
- Monitor implant and prosthetic condition during follow-up visits
Warnings & Precautions
- For professional dental use only
- Use only with compatible implant systems (H2.1 / H2.43)
- Ensure proper tightening to avoid loosening or damage
- Do not apply excessive force during placement
- Follow standard implantology and prosthetic protocols
Storage
- Store in a clean, dry environment
- Avoid contamination prior to sterilization
CadCam
