Product Description
15° Angular Abutment with Shoulder Internal Hex H2.43 — 1 mm
The 15° Angular Abutment with a 1 mm shoulder is a titanium prosthetic component designed for cement-retained restorations on compatible DMi Internal Hex H2.43 implants. Its angled configuration helps accommodate differences between the implant axis and the planned restoration.
The 1 mm shoulder provides a lower shoulder-height option for selection according to soft-tissue and restorative requirements. The engaging hex connection incorporates an anti-rotation feature, while the tapered body supports restoration fabrication. dmimplant.online
Specifications
- Component type: Angular abutment with shoulder
- Angulation: 15°
- Shoulder height: 1 mm
- Shoulder diameter: 4.7 mm
- Connection: Internal Hex H2.43
- Material: Ti6Al4V titanium alloy, ASTM F136
- Design: Engaging, with anti-rotation feature
- Restoration type: Cement-retained
- Compatible fixation screw: Ref. 701202
Indications for Use
- Cement-retained implant-supported restorations
- Cases requiring 15° prosthetic angulation correction
- Restorations requiring a 1 mm shoulder height
Sterilization
Supplied non-sterile. Clean and inspect before use, then sterilize in an autoclave at 135°C (274°F) according to the applicable manufacturer’s Instructions for Use and validated cycle.
Advantages
- 15° angulation for restorative alignment
- 1 mm shoulder option
- Anti-rotation connection
- Titanium alloy construction
- Compatible with designated DMi H2.43 implants
Reviews
There are no reviews for this product, be the first to leave your review.