All about product
Reviews
Questions
INSTRUCTION FOR USE
CAD/CAM Libraries
Product Description
The Angular Titanium Abutment H2.43 for Turning 25° is designed for the fabrication of custom cement-retained implant restorations. Featuring a 25° angled body relative to the implant axis, it enables correction of implant angulation and facilitates optimal prosthetic positioning in complex clinical cases.
Manufactured from medical-grade titanium alloy Ti6Al4V in accordance with ASTM F136 standards, the abutment offers excellent strength, biocompatibility, and long-term reliability. It is intended for use with implants featuring an internal hex connection of 2.43 mm and an internal thread of 1-72 UNF. The abutment connects directly to the implant using fixation screw 701203.
Designed for dental laboratory applications, this component serves as a base for the fabrication of custom implant abutments through milling and turning procedures, allowing the creation of patient-specific prosthetic restorations.
Compatible Implant Systems
- UNIQUE Implants: Ø3.75 mm, Ø4.2 mm, Ø5.0 mm, Ø6.0 mm
- PERFECT Implants: Ø4.2 mm, Ø5.0 mm, Ø6.0 mm
- PRIMA Implants: Ø3.3 mm, Ø3.75 mm, Ø4.2 mm, Ø5.0 mm, Ø6.0 mm
Key Features
- Designed for cement-retained restorations
- 25° angled abutment body
- Internal hex connection: H2.43 mm
- Internal thread: 1-72 UNF
- Manufactured from Ti6Al4V ASTM F136 medical-grade titanium
- Suitable for custom milling and turning procedures
- Direct implant connection with screw 701203
- Intended for dental laboratory use
Sterilization
The product is supplied non-sterile and must be sterilized before clinical use. Sterilize in a steam autoclave at 135°C (275°F) according to validated sterilization procedures.
Reviews
There are no reviews for this product, be the first to leave your review.
Answers & questions
No questions about this product, be the first and ask your question.
Angular Titanium Abutment H2.43 for Turning 25°
Product Description
The Angular Titanium Abutment H2.43 for Turning 25° is a prefabricated titanium prosthetic component intended for the fabrication of custom cement-retained implant restorations. The abutment features a 25° angulation relative to the implant axis and is designed for implants with an internal hex connection of 2.43 mm and an internal thread of 1-72 UNF.
The abutment is manufactured from medical-grade titanium alloy Ti6Al4V according to ASTM F136.
Intended Use
The Angular Titanium Abutment H2.43 for Turning 25° is intended for the fabrication of custom implant-supported cement-retained restorations. The component is customized by milling and turning procedures performed in a dental laboratory.
Contraindications
Do not use:
- In patients with known allergy or hypersensitivity to titanium alloys.
- With implant systems not listed in these instructions.
- If the component is damaged or shows signs of deformation or contamination.
Warnings
- This product is intended for use only by qualified dental professionals and dental laboratories.
- Use only original compatible components.
- Improper use may result in prosthetic complications, loosening of components, or restoration failure.
- Do not modify the implant connection interface.
Precautions
- Verify compatibility before use.
- Inspect the component prior to use.
- Avoid excessive material removal during milling and customization procedures.
- Follow accepted prosthetic and laboratory protocols.
- Maintain traceability of the product lot number in patient records.
Instructions for Use
Laboratory Procedure
- Verify compatibility of the abutment with the selected implant system.
- Inspect the abutment for damage or defects.
- Customize the abutment by milling and turning according to the planned restoration design.
- Finish and polish the customized abutment following standard laboratory procedures.
- Clean the component thoroughly before sterilization.
Clinical Procedure
- Sterilize the abutment before clinical use.
- Connect the abutment to the implant using fixation screw 701203.
- Verify proper seating and fit of the abutment.
- Fabricate or seat the cement-retained restoration.
- Remove excess cement according to accepted clinical protocols.
- Verify occlusion, stability, and soft tissue adaptation.
Sterilization
- The product is supplied non-sterile.
- Before clinical use, sterilize the abutment in a steam autoclave using a validated sterilization cycle.
- Recommended sterilization temperature: 135°C (275°F)
- Follow the autoclave manufacturer's instructions regarding exposure and drying times.
Storage
Store in a clean, dry environment in the original packaging. Protect from contamination, moisture, and mechanical damage.
CadCam
